Ir. Ts. Ainon Shakila Shamsuddin

Email: [email protected]

Ir. Ts. Ainon Shakila Shamsuddin is a Lecturer at the School of Engineering, UOW Malaysia. She holds a Bachelor’s degree in Electrical Engineering (Power) from UTM (1998) and a Master’s degree in Engineering Management from UiTM (2010). A registered Professional Engineer (Electronic) with the Board of Engineers Malaysia (BEM) and a Professional Technologist with the Malaysia Board of Technologists (MBOT).

Combining her passion for academia with extensive industry experience, she brings over 7 years of experience in educational institutions and boasts more than 14 years in R&D, Manufacturing, and Audit Management. Prior to her academic career, she held the position of Senior Engineer and Team Leader at Panasonic Appliances Air-Conditioning R&D Malaysia Sdn. Bhd.

In addition, she also has 3 years working experience as a Quality Assurance Supervisor at Steggles Poultry Pty Ltd, Hawthorne St,2322 Beresfield in New South Wales, Australia where she actively participates in both Internal and External Audits.

Demonstrating her dedication to the engineering profession, Ir. Ts. Ainon has actively participated with the Institute of Engineers Malaysia (IEM) for five consecutive terms. She currently serves on the Engineering Education Technical Division (E2TD) committee.

As a Safety Coordinator for School of Engineering she lead “The Safety and Health Towards IR4.0”, Exhibition and Competition Event that was organized by School of Engineering, and received Team Collaboration Award.

Besides that, she was an invited panellist for forum at Taylor’s University, organized by the Empowered Women Engineers Club.

Her current research interest includes Sustainable Power Grid Systems, Fault Analysis, Hybrid Renewable Energy Systems, Electric Verhicles, Optimization in Induction Motor Design.

Master of Engineering Management (University of Technology Mara), 2010
Research Title: Analysis of Performance of a New Winding Hermetic Motor Design with a Low-Cost Consumption Through Simulation And Experimental.

Bachelor in Electrical Engineering (Hons) (Power) (University of Technology Malaysia), 1998
Research Title: Investigate Efficiency Improvement for Rotating Electrical Machine: Maintenance and Design.

Year Title
2023

International Conference on Green Energy, Computing and Intelligent Technology (GEn-CITy 2023)

Chee Wei Siang, Ainon Shakila Shamsuddin, Lau Kim Boon (2023

Investigation of Electric Vehicle (EV) and Renewable Energy Sources (RES) for Low Voltage Distribution Network in Malaysia.

2020

International Conference on Multi-Disciplinary Research Studies and Education (ICMDRSE-20)

S Paramasivam, Thing Thing Goh, H.S. Chua, Ainon Shakila Shamsuddin, Alireza Zourmand, J Lawrence, C.C. Gee. (2020).

“Design and Application of 3D Printed Prosthetic Arm Controlled with an Arduino A Didactic Strategy.” International Conference on Multi-Disciplinary Research Studies and Education (ICMDRSE-20)

Published in a Journal Solid State Technology • Vol. 63 No. 6 (2020) / • Articles – Presented on 29th -30th April 2020, Published on November 2020

International Journal of Modern Agriculture

Rifayet Ashraf, Huang Shen Chua, Kiat Moon Lee, Mohammed J.K.Bashir, Thing Thing Goh, Ainon Shakila Shamsuddin (2020)

“The Potential Use of Biomass (Sapindus Mukorossi) for Production of Valuable Products” Published in International Journal of Modern Agriculture, Volume 9, No.4, 2020 ISSN: 2305- 7246

2020

International Journal of Engineering & Technology – Published Article

Praveena Nair, Ainon Shakila, Tan Sin Jin (2019) Conceptual Framework on the Green Synthesis of Metal Nanoparticles using Soap Nuts” Vol: Iss No 8 (1.1) Page Number 26-30.

Innovative and applied Chemistry for (IACE2019)

Engineering- Oxford, London

Praveena Nair, Rubentheren, Tan Sin Jin, Ainon Shakila Shamsuddin

“Green Synthesis of Photocatalytic Nanoparticles: An Approach towards River Restoration” IACE2019), Innovative and applied Chemistry for Engineering- Oxford, London, International Journal of Modern Agriculture, Volume 9, No.3, 2020 ISSN: 2305-7246

The Potential Use of Biomass (Sapindus Mukorossi) for Production of Valuable Products

RESEARCH GRANT

 

2018

Duration: Feb 2018 – Feb 2020
Title:   KDU Research Grant on Quantum Dots: “Synthesis and Application of an Effective Photocatalyst for River Reclamation”
Sponsors/Grant: KDU Internal Grant (RM17,800)

  1. Academic Judge – 17th EURECA International Engineering and Computing Research Conference,
    Taylor’s University Lakeside Campus – (29th June 2022)
  2. Education Technical Division, IEM (Co-opted Member) – Session 2023/2024
  3. Education Technical Division, IEM (Committee Member) – Session 2022/2023
  4. Education Technical Division, IEM (Committee Member) – Session 2021/2022
  5. Education Technical Division, IEM (Committee Member) – Session 2020/2021
  6. Education Technical Division, IEM (Committee Member) – Session 2019/2020
  7. Committee – Community Engagement Project by School of Engineering – STEM Exhibition and Activities@ Kinderland USJ, Subang Jaya – (March 2019)
  8. Core value judges for First League Lego Robot Competition – Mission Moon themed in collaboration with Ministry of Education and IET Malaysia (June 2019)
  9. Member – Community Project by School of Engineering – Community Service @ Grace Community Kuala Lumpur (Aug 2018)
  10. Core value judges for First League Lego Robot Competition- AQUA Adventure themed in collaboration with Ministry of Education and IET Malaysia- (Nov 2018)
  11. Panel of Judge for First League Lego Robot Competition – Animal allies themed in collaboration with Ministry of Education and IET Malaysia- ( July 2017)

Bachelor’s Degree Final Year Projects (FYP)

 

Adrian Looi Song Qian (2023)” ELECTRIC VEHICLE CHARGING SYSTEM

Mohamed Hesham(2022) “Analysis on Hybrid Renewable Energy (RE) Fed Battery Electric Vehicle Charging Station synergies in smart microgrid.”

Chee Wei Siang (2022) “Investigation of Electric Vehicle (EV) and Renewable Energy Sources (RES) for Low Voltage Distribution Network in Malaysia.”

Lay Zhong Meng (2021) “Development of suitable Fault steady-state approach for LCC-HVDC- supplied AC system.”

Tan Chung Hang (2021) “Investigation of Fault Response based on Identified Fault Features for DC Microgrids.”

James Griffin Kunje (2021) “Investigation of Integrated Energy Storage System in Wind Power Instability Mitigation.”

Aric Ng Wai Kei (2020) “Design, simulate and Analyse an Improved Fault Current Limiting Circuit for VSC-HVDC Transmission System.”

Dineshni Ramasandram (2020) “Investigate magnetic properties, losses and thermomechanical process of Fe-6.5wt.%Si High Silicon Steel.

Edmund The Boon Jun (2019) “Design smart tiles to harvest hybrid energy from solar radiation and mechanical vibration.”

Kek Kang Loong (2018) “Dynamic Modelling Of Harmonics Effects On Energy Efficient Motor (EEM) Compared To Standard Motor (STM).”

Chen Keat Lun (2017) “Fabrication of Conveyor Belt Speed Controller System Based Different Weight Sensing.”

 

Diploma Industrial Projects

 

John Laurence Gerry (2019) “Fabrication And Control Of Prosthetic Hand.”

Koo Suit May (2018) “Development Of Water Level Using Ultrasonic Sensor.”

Meutia Binti Marzuki (2017) “Fingerprint Vehicle Starter”.

2023

Collaborate with IEM and organized STEM activities.

  • STEM carnival was held at University of Nottingham Malaysia on 14/2/2023.
  • STEM awareness activity at SK Bukit Tampoi (A) on 18/8/2023.
  • STEM and ROBOTIC Exhibition at Kg Orang Asli Bukit Dugang on 19/3/2023

 

2022

Team Collaboration Award at 2022 staff Award for leading the event for “Safety and Health Towards IR4.0” .